|
Authorized AMSOIL Dealer Website |
|
|
|
 |
|
HOME | ONLINE STORE | PRODUCT INDEX | INFORMATIVE ARTICLES | FAQS | WHOLESALE PRICING | Download Catalog (PDF 2.6MB) |
|
|
8.2% Increase In Miles Per Gallon with AMSOIL Synthetic Lubricants
Fuel accounts for roughly 37 percent of Class 8 truck operating expenses, and reducing Gas Mileage expenses is a top priority for truck operators. AMSOIL is the leader in the race to develop fuel efficient low-viscosity lubricants for trucking and other heavy-duty diesel applications. Independent laboratory testing shows AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil in the engine and AMSOIL synthetics in the drivetrain provide up to 8.2 percent increase in miles per gallon than other popular lubricants provide.
Introduction
The research institute used the SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure-Type II, an industry standard test procedure for comparing in-service fuel consumption of a vehicle operated under two conditions, one with the control lubricants in place, the other with the test lubricants in place.
Vehicles and Route
The trucks were equipped with auxiliary weigh fuel tanks and quick disconnect couplings to facilitate accurate data gathering. Each truck pulled a 45-foot long flatbed trailer equipped with 11R-24.5 low-profile tires and loaded with concrete blocks so that the gross vehicle weight (GVW) of each vehicle was 75,550 ±100 lbs.
Lubricants and Fuels
The test lubricants were AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil for the engines, AMSOIL Signature Series Synthetic 20W-50 Racing Oil for the transmissions and AMSOIL Signature Series Synthetic 75W-90 Gear Lube for the drive axles. The test vehicles used the test lubricants for their test segments. All vehicles used Exxon No. 2 diesel fuel dispensed from the same storage tank for all driving segments.
Procedure
Conditions including speed, tire pressure, headlight and fan use and window openings were held constant between all vehicles in each driving segment. Finally, testing proceeded only if wind direction, wind speed and temperature were within test parameters.
Results
Findings
Discussion
Additionally, while the present study did not include analysis of wear control, wear control is an important issue with low viscosity lubricants and one fully addressed by AMSOIL through additional testing. Traditionally, the benefit of improved fuel economy provided by low viscosity lubricants is offset by a penalty in wear control. Such is not the case with Signature Series and 3000 lubricants, as evidenced by Four-Ball Wear testing conducted by an independent laboratory (results shown on product labels) and a growing body of demonstration and on-road data.
The trucks traveled 125,000 miles with-out an oil change and the rate of wear metal generation found in used Series 3000 samples was lower than that found in used control oil, Pennzoil Long Life 15W-40, which is changed at 20,000-mile intervals. Additionally, the viscometrics of the AMSOIL fluids provide a wear control benefit in cold temperature applications since low viscosity fluids flow more freely in cold temperatures than high viscosity fluids do. Oils that flow easily in cold temperatures provide faster post-startup wear protection in cold engines than do less fluid oils. They also provide easier starting and reduced battery drain. Finally, AMSOIL product users are protected by the AMSOIL warranty, which, unlike warranties offered by other oil companies, is not limited by time or mileage and does not require user registration and approval.
Conclusion
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Motor Oil provides better wear protection than these popular high viscosity diesel oils. In fact, independent testing showed the high-viscosity oils tested produced wear scars up to 45 percent larger than that of Series 3000. What Does a Savings of 8.2% Mean? Imagine a fleet of 100 class 8 vehicles running an average 120,000 miles per year at an average 6.5 mpg with diesel fuel at $1.35 a gallon. The fleet spends $2,492,308 on fuel annually. Now imagine the fleet uses AMSOIL products and improves its miles-per-gallon by 8.2 percent. The fleet now spends $2,303,427 on fuel annually. That’s a savings of $188,881! That money could buy a year’s worth of AMSOIL synthetic lubricants for the fleet plus a year’s fuel for 3 to 6 trucks – with cash left over!
CUMMINS M-11 ENGINE
FULLER RTXF-14710B
TRANSMISSION
EATON MODEL DS 404 DRIVE
AXLES
After deducting the annual AMSOIL lube cost from $188,881, the fleet still has between $68,277 and $150,852 – enough to buy a year’s worth of fuel for 3 to 6 trucks – with cash left over! Extended Drains Save You Even More! See for yourself! A Virginia owner-operator used AMSOIL Synthetic 15W-40 Motor Oil for 409,000 miles without an oil drain! His engine was as wear-free as engines in comparable service treated to TWENTY TIMES the oil changes, according to the findings of a certified, independent engine rater.
AMSOIL Oil
Analysis
Interested in becoming an AMSOIL Dealer? Knowledge is Power! We have set up a plan to help you excel in your own AMSOIL Dealership. This is exclusive to dealers in our group only! With effort and the information we provide, you should be well on your way to creating a successful business. We have the knowledge base to help you succeed! We are the largest group in AMSOIL consisting of OEM Engineers, Designers and lubricant specialists. We are confident that our experience will provide an excellent source of knowledge and information while building your dealership or using AMSOIL synthetic products in your vehicles / equipment. AMSOIL has the warehouses, manufacturing, distribution systems and marketing plan already in place! All you have to do is use the tools offered and develop your own personal group of AMSOIL Dealers. AMSOIL is an excellent company to represent and the synthetic products are the best there is, period!
The
AMSOIL Synthetics Dust the Competition!
The Largest AMSOIL Dealer Group in the U.S.
Place Your Order Online Now - click here
AMSOIL is Proudly Made in the U.S.A. America's Oil. AMSOIL Products: Wholesale Pricing Options AMSOIL Synthetic Motor Oil - Designed Engine Oil, Lubricants, Air and Oil Filters and Greases - provide superior performance and protection. Ams oil saves you time, money, and wear on your vehicles and equipment! AMZOIL Best Synthetic
Oil , Lubes & Filtration
Smart Synthetics- Synthetic Lubricants Automotive Link Directory Home AMSOIL Online Store Product Info Synthetic Oil Articles Synthetic FAQ'S
Site Map
AMSOIL INC. WARRANTY
Racing Videos
Amsoil Racing Oil AMSOIL Synthetic Lubricants and Filtration products dramatically improve your vehicles performance, fuel economy and extend engine life. Independently Tested and Proven World's Best Synthetic Motor Oil. AMSOIL the Smart Synthetics!
|
||||||||||||||||||||||||||||||||||||||||||
Replacing
popular conventional engine and driveline lubricants with AMSOIL synthetic
lubricants in Class 8 diesel-fueled vehicles Increased Gas Mileage up to
8.2%
increase in miles per gallon, according to the findings of an
independent test facility. 
The
three test and one control vehicles were 1995 International Model 9200
truck-tractors with Cummins M-11 engines (rated at 350 hp at 1600 rpm),
Fuller RTXF 14710B transmissions, Eaton Model DS/RS 404 drive axles (3.90
ratio), 11R-24.5 low-profile tires and new oil and air filters. All four
vehicles had been operated between 250,000 and 285,000 miles prior to the
study. 
The
test route represented typical long-haul interstate highway operations, with
asphalt road surfaces and generally flat terrain. The low traffic density
route covered a total of 40 miles with a 20-mile southbound segment and the
return north-bound segment. Fuel consumption was measured separately for
each direction. 
Each test vehicle ran a baseline segment, in which the truck was equipped
with the control lubricants, and three test segments, in which it was
equipped with test lubricants. The control vehicle concurrently ran each
driving segment using control lubricants. 
Test conditions were held close to ideal for maximum fuel economy. In many
instances of less-than-ideal conditions, the synthetic test lubricants would
have provided even more fuel economy improvement. For example, synthetics’
superior cold temperature fluidity provides a larger proportion of fuel
savings in cold operating conditions. 
For
example, an ongoing fleet demonstration is providing evidence of the
excellent wear control of Series 3000. Since January 1996, AMSOIL and a
northern tier trucking fleet have been conducting a demonstration using
Series 3000 in the 1996 Cummins N-14 ESP3 engines of five 1996 Kenworth
class 8 trucks. 
